Building a DIY Storage Shed from Scratch

How to frame a shed

While framing the shed’s walls

Wow! Time really does fly! A little over a year ago, I posted the first part of this project. In that post, I explained how we built the foundation for this DIY Storage Shed (my apologies if you’ve been waiting for me to show the rest of the work before you start working on your own shed!).

To be honest, it didn’t take me a year to build it, it has just been taking us way too long to work on posts for the blog. There are way too many different things taking our time these days, from virtual school right after the quarantine started in March, to the birth of our beautiful daughter in April. Everything is taking longer in our home now.

The good thing is that it is done now, and we got all the landscaping tools, including the lawnmower, and the wheelbarrow out of the garage! There is also enough space in there for the table saw and other smaller tools. I’m just super happy to finally have those in their own storage shed, instead of taking space in the garage like they used to.

BUILDING A DIY STORAGE SHED FROM SCRATCH

I would say the shed’s foundation was about a third of the work. The next steps included framing the walls and the roof. Installing the roof, house wrap, trim, siding, an access door, and painting the shed.

As you may remember from that previous foundation post, our idea was to make the shed look as much like it is part of the house as possible. Although it is not attached to the house (because that would require building a proper foundation for it), from the outside it looks like it is.

To build the shed, we used the following tools and materials. Quantities would depend on the size of the shed you are building:


FRAMING AND ROOFING THE DIY STORAGE SHED

These are actually a few steps in one, but they are all part of the structure of the shed.

To start framing the walls, I first cut the pressure treated lumber for the three different sill plates we needed. I then measured, drilled, and checked that the holes aligned with the threaded rods sticking out of the foundation blocks.

How to build a really solid shed

Test fitting the sill plates

 

Then, I framed the first wall and put it in place.

How to build your own shed cheap

Framing the first wall

 

How to lay foundation for shed

Tightening the nuts that hold the sill plate, wall to the foundation

 

How to build a shed base with concrete blocks

First wall up!

 

Then the second one.

How to build a shed foundation on blocks

Second wall up!

 

And the third one.

How to frame a shed

Third wall up!

 

After the three walls, I framed a fourth wall basically touching the exterior of the house. This wall serves three purposes, it strengthens the structure, gives more space to hang landscaping tools, and it also supports the roof’s “beam” (that long 2×4 you see sticking out the side of the shed).

How to make a level base for a shed

The wall against the house strengthens the structure of the shed

 

As you can see, I framed the walls, but I didn’t nail the OSB boards right away like it’s usually done to keep the framing from wobbling and twisting. The reason: I was working by myself, so if I nailed the OSB, the walls were going to be way too heavy for me to move, lift, and put in place.

Nothing wrong with that. However, it was necessary to use the level before and while nailing the OSB, to make sure that all the walls were perfectly leveled.

With the walls ready, I moved on and framed the roof.

How to build roof shed rafters

Shed’s roof “rafters” in place

 

How to make rafters for a shed

After framing the shed’s roof

 

How to concrete slab for shed

The door opening for a 36-inch wide door

 

How to do a shed roof

At this point, the framing was way underway

 

Soon after, I installed the fascia, flashing, the roofing felt, and the asphalt shingles. Then the soffits (not visible).  I also used the spray foam to seal the gap between the house and the shed’s framing.

How to put a roof on a shed

After installing the fascia, flashing and roofing material

 

 

How to build a simple roof for a shed

Time to make the shed look nice!

 

Can you tell I could not wait to get that mower out of the garage!?

 

INSTALLING HOUSE WRAP, TRIM, SIDING, AND AN ACCESS DOOR

After completing the framing and the roof, the next step was to install the house wrap. I’m not sure if they use house wrap on those sheds you can get at Home Depot or Lowes, but considering the low cost, I decided to do things right. This is a pretty easy step too, and all you need is the heavy-duty stapler.

Once done with the house wrap, it was time to install the trim pieces and the access door.

How to damp proof a wooden shed

Right after installing the house wrap and the first few pieces of trim

 

How do I waterproof my shed walls

The door was next, then the couple of pieces of trim around it

 

How to put a door on a shed

Ready to start installing the siding

 

The siding was next, which was the last “construction” step.

How to put on siding on a shed

The first couple of walls done. I had to cut the angled upper part twice before I got it right

 

How to build a large shed from scratch

Working on the third and last wall

 

CAULKING AND PAINTING THE DIY STORAGE SHED

With pretty much everything done, it was just a matter of making the shed look nice, and another part of the house.

That meant caulking all the trim seams and filling up all the nail holes on the siding, before moving on and painting it.

How to build a shed step by step

Caulking the trim and siding on the new storage shed

 

Building a DIY Storage shed from scratch

Caulking to fill up gaps, seams on the new shed’s trim and siding

 

To make it look like it was part of the house, we used the same paint we got from the builder. I applied a couple of coats to both the trim and the siding. The door was painted the same color as the siding, both inside and outside.

How to frame a storage shed

Painting the shed the same color as the house

 

How to frame up a shed

The door is also (inside and out) the same color as the siding

 

How to frame a shed wall

Putting the first coat of paint on the trim

 

How to frame a small shed

Super excited to see the shed finally finished

 

How to put up a shed

The shed after I finished painting it

 

As you can see in a few pictures, we had already moved pretty much all the landscaping tools to the shed before it was even finished. That shows you how bad I wanted them out of the garage and how happy I am to have it now!

*This post contains affiliate links.

 

Building a DIY Storage Shed

7 comments

    1. Hello, Mylene,

      Thanks for your comment and for reading our blog.
      If I remember correctly, it was about $800.00 total. This does not include the concrete pad, which we had poured a few years earlier when we built our backyard patio, and the paint, which we got from the builder.

      Let us know if you decide to build one!

      1. I’ve had plans drawn for this very thing for 9 years, but our HOA won’t allow any type of shed in our back yard – even if it can’t be seen from the street. Our garage is about 4-feet smaller in width than the last house we had built. Where are we supposed to put our landscaping tools?! Love the look of your shed! It would blend right into the back of our house!

Let us know what you think!